Remove the cartridge
Part of project
how to change a faucet cartridge · Step 3 of 5
In this video
Use a cartridge puller or pliers to pull the cartridge out of its seat.
Goal: Replace the old cartridge with a new one.
Used in this video
- Cartridge Puller (Cartridge Puller Design: Two-prong, Cartridge Puller Screw Size: Standard, Durability: Medium, Cost: Low) — Removing the cartridge.
149K subscribers
FAQs
What specific tools are essential for removing the faucet handle and cartridge?
You'll typically need a screwdriver (flathead or Phillips, and potentially an Allen wrench/hex key like the Eklind set for handle screws), an adjustable wrench or pliers, and a small utility knife for prying decorative caps. A basin or rag is also helpful for catching drips.
How difficult is changing a faucet cartridge for a beginner, and how long does it typically take?
This is generally considered a beginner-level DIY project. For most standard faucets, it can take anywhere from 30 minutes to an hour. The most challenging part is often identifying and carefully removing the old cartridge without damaging the faucet body.
What are the most important safety precautions to take before starting this faucet cartridge replacement?
Always turn off both the hot and cold water supply valves located under the sink to prevent flooding. It's also wise to open the faucet briefly after turning off the water to drain any residual water and relieve pressure in the lines.
My faucet handle seems stuck, or the old cartridge won't budge. What should I do?
For a stuck handle, carefully check for a hidden set screw under a decorative cap or on the side. If the cartridge is stuck, try gently wiggling it with pliers or applying a penetrating lubricant, being cautious not to apply excessive force which could break faucet components.
TranscriptHide
Auto-generated transcript. May contain errors.
Remove the cartridge
Part of project
how to change a faucet cartridge · Step 3 of 5
In this video
Use a cartridge puller or pliers to pull the cartridge out of its seat.
Goal: Replace the old cartridge with a new one.
Used in this video
- Cartridge Puller (Cartridge Puller Design: Two-prong, Cartridge Puller Screw Size: Standard, Durability: Medium, Cost: Low) — Removing the cartridge.
Frequently Asked Questions
What specific tools are essential for removing the faucet handle and cartridge?
You'll typically need a screwdriver (flathead or Phillips, and potentially an Allen wrench/hex key like the Eklind set for handle screws), an adjustable wrench or pliers, and a small utility knife for prying decorative caps. A basin or rag is also helpful for catching drips.
How difficult is changing a faucet cartridge for a beginner, and how long does it typically take?
This is generally considered a beginner-level DIY project. For most standard faucets, it can take anywhere from 30 minutes to an hour. The most challenging part is often identifying and carefully removing the old cartridge without damaging the faucet body.
What are the most important safety precautions to take before starting this faucet cartridge replacement?
Always turn off both the hot and cold water supply valves located under the sink to prevent flooding. It's also wise to open the faucet briefly after turning off the water to drain any residual water and relieve pressure in the lines.
My faucet handle seems stuck, or the old cartridge won't budge. What should I do?
For a stuck handle, carefully check for a hidden set screw under a decorative cap or on the side. If the cartridge is stuck, try gently wiggling it with pliers or applying a penetrating lubricant, being cautious not to apply excessive force which could break faucet components.
Video Transcript
(195 characters)Hide
Video Transcript
(195 characters)Transcript may be auto-generated and contain errors.