Locate the main water shut-off valve for your home or the specific shut-off valves for the bathroom. After turning them off, open the existing shower faucet handles to release any remaining pressure and confirm water flow has stopped. This prevents unexpected gushes and makes the job cleaner and safer.

You might need an Allen wrench (often included with new faucets or for old handle removal), a utility knife for cutting caulk/sealant, and plumber's tape (Teflon tape) for threaded connections. A basin wrench can sometimes be helpful for tight nuts, though less common for shower valves.

Leaks often occur due to improperly tightened connections, missing O-rings, or incorrect cartridge seating. Ensure all threaded connections are hand-tightened, then given a quarter to half turn with a wrench, using Teflon tape on male threads. Double-check that the cartridge is fully inserted and secured according to Delta's specific instructions.

While 3 hours is achievable for a straightforward replacement, beginners should budget 4-6 hours. Removing an old, corroded faucet can take extra time and effort if screws are seized or old caulk needs extensive cleaning. Always allow buffer time for unexpected issues.