The 6-hour estimate includes the potential need to cut and repair a drywall access panel, which is the most time-consuming part of the project. If your overflow drain is accessible from behind (e.g., through an existing access panel or an unfinished basement/crawl space), or if you can replace the gasket without needing wall access, the project can often be completed in under an hour.

No, if you can access the overflow gasket without cutting into drywall, you primarily need a screwdriver, rags, cleaning solution, safety glasses, and the new gasket. Tools like the jab saw, joint knife, and sanding sponge are only required if you need to create and repair a drywall access panel to access the overflow plumbing behind the tub.

A leak might persist if the overflow pipe itself is cracked or loosely connected to the tub, the new gasket isn't seated perfectly flush, or the metal flange around the overflow opening inside the tub is corroded or damaged. Always ensure all contact surfaces are thoroughly cleaned and smooth before installing the new gasket for a watertight seal.

Always wear safety glasses to protect your eyes from debris and cleaning solutions. If you need to cut into drywall, use a dust mask to avoid inhaling fine particles and a stud finder to prevent cutting into pipes or electrical wires. Ensure the tub is completely drained before starting, and if possible, turn off the main water supply to prevent accidental water damage.