Step 7 · Extract the Bathtub

This is the step most people slow down on. Take it one move at a time — there’s no rush, and you can rewind the clip as many times as you need.

With a helper, you can now remove the tub. Since it is a lighter acrylic/fiberglass model, it should be manageable. Use a utility knife to cut any remaining sealant between the tub and the floor. Have one person stand at each end. Lift the edge of the tub that is away from the wall, then pull it outwards from the plumbing wall. Once it is clear of the studs, you can pivot and carry it out of the bathroom. If the tub is too large to fit through the doorway, you can easily cut it into two or three pieces using the reciprocating saw. Cut carefully and be aware of any fiberglass dust, which can be an irritant.