Turn Gas Control to ON — Turn the Gas Water Heater On
Part of project
How to Relight a Gas Water Heater Pilot Light: A Step-by-Step Guide · Step 4 of 5
In this video
Slowly release the pilot button. The pilot light should remain lit. You can turn off the room lights to see the small blue flame better through the sight glass. Now, turn the main gas control knob from 'PILOT' to the 'ON' position. The water heater is now ready to heat water.
Goal: Enable the main burner.
650K subscribers
FAQs
What should I do immediately if I smell gas at any point during this relighting process?
If you detect any gas odor, stop immediately. Turn off the main gas supply valve to your water heater and evacuate the area. Do not attempt to continue the relighting process, and contact your gas company or a qualified plumber for professional assistance to locate and fix the leak.
I've lit the pilot, but it goes out as soon as I release the control knob. What's the problem?
This common issue typically points to a faulty or insufficiently heated thermocouple. Try holding the control knob in for the full 60 seconds (or even a little longer) to ensure the thermocouple has enough time to heat up. If the pilot still won't stay lit, the thermocouple may be dirty, misaligned, or need to be replaced.
Do I need the specific Husky screwdriver and Scripto lighter mentioned, or can I use different tools?
No, the specific brands mentioned are just examples. Any standard Phillips or flathead screwdriver that fits your water heater's access panel screws will work. For lighting the pilot, any long-reach lighter, such as a BBQ lighter or even a long wooden match, is suitable.
The project is marked 'beginner' and '45 minutes,' but I'm finding it difficult or it's taking much longer. What should I do?
The difficulty and time estimates are averages; it's perfectly fine if it takes you longer, especially if it's your first time. If you're struggling with any step, feel unsafe, or simply can't get the pilot to light after several attempts, don't hesitate to pause and call a qualified plumber for assistance. Safety is paramount.
TranscriptHide
Auto-generated transcript. May contain errors.
Turn Gas Control to ON — Turn the Gas Water Heater On
Part of project
How to Relight a Gas Water Heater Pilot Light: A Step-by-Step Guide · Step 4 of 5
In this video
Slowly release the pilot button. The pilot light should remain lit. You can turn off the room lights to see the small blue flame better through the sight glass. Now, turn the main gas control knob from 'PILOT' to the 'ON' position. The water heater is now ready to heat water.
Goal: Enable the main burner.
Frequently Asked Questions
What should I do immediately if I smell gas at any point during this relighting process?
If you detect any gas odor, stop immediately. Turn off the main gas supply valve to your water heater and evacuate the area. Do not attempt to continue the relighting process, and contact your gas company or a qualified plumber for professional assistance to locate and fix the leak.
I've lit the pilot, but it goes out as soon as I release the control knob. What's the problem?
This common issue typically points to a faulty or insufficiently heated thermocouple. Try holding the control knob in for the full 60 seconds (or even a little longer) to ensure the thermocouple has enough time to heat up. If the pilot still won't stay lit, the thermocouple may be dirty, misaligned, or need to be replaced.
Do I need the specific Husky screwdriver and Scripto lighter mentioned, or can I use different tools?
No, the specific brands mentioned are just examples. Any standard Phillips or flathead screwdriver that fits your water heater's access panel screws will work. For lighting the pilot, any long-reach lighter, such as a BBQ lighter or even a long wooden match, is suitable.
The project is marked 'beginner' and '45 minutes,' but I'm finding it difficult or it's taking much longer. What should I do?
The difficulty and time estimates are averages; it's perfectly fine if it takes you longer, especially if it's your first time. If you're struggling with any step, feel unsafe, or simply can't get the pilot to light after several attempts, don't hesitate to pause and call a qualified plumber for assistance. Safety is paramount.
Video Transcript
(200 characters)Hide
Video Transcript
(200 characters)Transcript may be auto-generated and contain errors.