Skip to main content
True Value
Project

Reassemble Faucet — Reassemble the Shower Faucet

Beginner3 hours

Part of project

How to Replace a Shower Faucet Valve: A Step-by-Step Guide · Step 5 of 5

Helpful?

In this video

Begin reassembling the faucet in the reverse order of disassembly. Place the chrome sleeve back over the new cartridge. Position the escutcheon plate against the wall, aligning the screw holes, and secure it with the two long screws. Tighten the screws evenly, but do not overtighten. Place the white plastic temperature adapter onto the cartridge stem, followed by the main handle. Secure the handle with the center screw using the Phillips screwdriver. Finally, snap the decorative cap back into place on the handle.

Goal: Re-install faucet trim and handle

  • Tighten the escutcheon plate screws alternately to ensure the plate sits flush against the shower wall without warping.

Used in this video

  • Screwdriver (Head Type: Phillips) — Securing the escutcheon plate and handle.
221.8K views3.3K10 minutes
Lowe's Home Improvement

1.3M subscribers

View Channel

FAQs

What are the essential tools I'll need for this shower valve replacement project?

You'll definitely need a screwdriver (a 6-in-1 multi-screwdriver is ideal) and pliers. Depending on how stuck your old cartridge is, a specialized cartridge puller tool might also be necessary. Ensure you have your replacement cartridge on hand before you begin.

What is the most critical safety step I should take before beginning this repair?

The most critical step is to turn off the water supply completely, preferably the main shut-off valve for your home or the specific shut-off valves for the shower. Double-check by running a nearby faucet to confirm the water is off. This prevents flooding and potential water damage.

How difficult is replacing a shower faucet valve for a beginner, and how long should I expect it to take?

This project is rated as 'beginner' difficulty. While it involves several steps, most are straightforward. You should allocate approximately 3 hours, especially if it's your first time or if you encounter a stubborn cartridge.

What should I do if the old shower cartridge is stuck and won't come out easily?

First, ensure all retaining clips or nuts are fully removed. If it's still stuck, you may need a specialized cartridge puller tool, which can be rented or purchased from a hardware store. Applying a penetrating lubricant (like WD-40) and letting it sit might also help loosen it.

Transcript
Hide

it and it'll seat all the way down jiggle it until it goes in click gonna put that outer sleeve back on and then the outer cover plate and the trick is to get that screw lined into the fixture this is a good time to click like on the video if it's helping you you can order one through one of the affiliate links down below and we'll make sure that you can get the right part you're gonna just keep assembling everything and put it back and I like to jiggle it and make sure it's properly seated tightening even is definitely the way to go put this temperature adjuster in there put the handle back on I'm just testing to see if it works looks like the water poured out of there so that's a good sign we'll finish buttoning it up let's put that last bolt back in and I want to thank you guys for watching see if this helped you out please like subscribe and share put that last little button back on now we're gonna turn the water back on

Auto-generated transcript. May contain errors.