Skip to main content

Diagnose the Improper Pitch — Inspect and Manually Clear Surface Debris

Intermediate6 hours

Part of project

How to Clear a Clogged Plumbing Vent Stack · Step 2 of 5

Helpful?

In this video

Begin in the attic by locating the plumbing vent pipe. Visually inspect the pipe for an incorrect pitch or sag. In the video, the technician identifies a black PVC vent pipe that is pitched the wrong way, allowing it to collect rainwater and create a water trap. This trap is diagnosed as the cause of a gurgling sound in the home's bathtub drain. The issue likely occurred during a previous re-roofing where an improperly sized flashing was installed.

Goal: Plumbing Pipes Repair

  • Gurgling drains are often a symptom of a blocked or improperly configured vent pipe rather than a clog in the drain line itself.

Used in this video

  • Flashlight (Tool Type: Hand Tools, Flashlight_Type: Handheld)Illuminating the dark attic space to inspect the plumbing pipe.
30.1K views1205 minutes
Drainx

733 subscribers

View Channel

FAQs

What are the most common signs that my plumbing vent stack is clogged, and not just a regular drain?

Common signs include multiple slow drains throughout your home, gurgling sounds from various drains or toilets, or a persistent sewer gas odor. If these symptoms appear in several fixtures simultaneously, it's a strong indicator of a main vent stack blockage rather than a localized drain issue.

How do I safely access my roof to clear the vent stack, especially if I'm not comfortable with heights?

Always use a sturdy extension ladder, like the XTEND+CLIMB 760P+, ensuring it's on level ground and secured. Wear slip-resistant shoes (e.g., Shoes For Crews) and consider having a spotter to stabilize the ladder. If you're genuinely uncomfortable or inexperienced with roof work, it's safer to call a professional.

What if my garden hose isn't long enough or powerful enough to clear the blockage in the vent stack?

If a standard hose like the GardenJoy 5/8 in. x 50 ft. doesn't reach or clear the clog, consider using a longer, more flexible hose like the Pocket Hose Silver Bullet 100 ft., which is designed to be kink-free. You might also need to use the drain auger (THEWORKS 3/8 in. x 25 ft.) as the next step for more stubborn blockages.

What should I do if the drain auger gets stuck in the vent pipe during the clearing process?

If the auger gets stuck, try gently rotating it counter-clockwise while pulling back to disengage it from the blockage or a pipe joint. Avoid excessive force, as this could damage the pipe or the auger itself. If it remains firmly stuck, do not force it; you may need to call a professional.

Transcript
Hide

Hey guys, Jesse with American Raid on Mitigation. Just a quick tip if you're ever up in your customers attic and you know To something you should point it out to them. So up here I noticed that their plumbing vent is pitched the wrong way And I think what happened is they probably had a new roof put on at some point and they switched us out to a frost free One of those metal flashings that goes over the whole top with the lead on top And it was probably too tall So some somewhere another this got unhooked And it got pushed down and this fills with water because it's not sloped right rain water And I asked the customer and their bathtub gargles that's been doing it for a few years That somebody out to diagnose it they couldn't figure it out. So if you see something like this mention it to your customers. They'll appreciate it

Auto-generated transcript. May contain errors.