Skip to main content
True Value
Project

Install New Drain and Pop-Up Assembly — Fine-Tune the Range of Motion

Beginner

Part of project

How to Adjust a Bathroom Sink Pop-Up Drain Stopper · Step 5 of 6

Helpful?

In this video

Insert the new drain assembly into the sink drain hole. From below, screw on and tighten the drain body. Assemble the pop-up drain mechanism by inserting the pivot rod and connecting it to the lift rod strap. Adjust as needed to ensure the stopper opens and closes correctly.

Goal: Generic Sink Repair (Standard)

  • The pop-up drain shown is a plastic quick-connect style, which simplifies assembly.

Used in this video

  • Pliers (brand: unknown) · optional — Final tightening of connections
14.5K views15 minutes
MrKistel

58K subscribers

View Channel

FAQs

What specific tools are essential for this pop-up drain adjustment, and why are so many types of towels mentioned?

You'll primarily need a screwdriver (Phillips or flathead, matching your clevis screw) and a bucket to catch any drips. The various towels are listed for cleaning, protecting your cabinet, and absorbing spills, but any absorbent cloth you have on hand will work perfectly for this beginner-friendly project.

How long should I expect this project to take, and is it truly suitable for a beginner DIYer?

This project is very beginner-friendly and typically takes only 15-30 minutes once you've identified the components. It's a quick fix that doesn't require extensive plumbing knowledge or special tools, making it an excellent starting point for home improvement.

After adjusting, my stopper still leaks or won't fully open/close. What should I troubleshoot next?

First, remove and thoroughly clean the stopper and the drain opening to eliminate debris. Then, double-check that the pivot rod and clevis strap are securely connected and not binding. Make small, precise adjustments to the clevis screw, testing after each increment, as over-tightening or incorrect positioning can cause issues.

Are there any important safety precautions I should take before working under the sink?

While this adjustment doesn't usually involve disconnecting water lines, it's wise to have a bucket handy for unexpected drips. Ensure you have adequate lighting under the sink to clearly see the components. Be cautious of sharp edges or tight spaces to avoid minor injuries.

Transcript
Hide

Now, if you haven't noticed already, this is a project source faucet with the drain. I'm not a big fan of these, but this is what the customer had and requested to put it. The only thing good about these is how quick you can put the pop-up assembly together. And just to piss people off.

Auto-generated transcript. May contain errors.