Skip to main content
True Value
Project

Remove the Old Drain Hose — Preparation and Safety

Beginner2 hours

Part of project

How to Replace a Washing Machine Drain Hose · Step 1 of 7

Helpful?

In this video

Turn the washing machine to access the back panel. Using a screwdriver with a nut driver bit, loosen the hose clamp that secures the drain hose to the machine's drain outlet. Pull the hose off the fitting. Be prepared for water to spill out. Then, pull the other end of the hose out of the wall drain pipe and remove the old hose completely.

Goal: Disconnect and remove the old hose from the washing machine and wall drain.

  • A significant amount of water can drain out of the machine when the hose is disconnected. Have a towel or bucket ready.

Used in this video

  • Screwdriver (Tool Type: Hand Tools, Tool Quality: Consumer grade, Power Source: Manual, Size/Specification: Multi-bit screwdriver with nut driver attachment.) — Loosening the hose clamp.
  • Towel (Tool Type: Cleaning tools) — Soaking up water that drains from the hose and machine.
145.7K views1.2K5 minutes
Chris Notap

1.1M subscribers

View Channel

FAQs

What type of drain hose should I buy, and does the length matter?

You'll need a corrugated or smooth appliance drain hose, such as the Everbilt 8 ft. Corrugated Washing Machine Discharge Hose. Ensure the new hose is long enough to reach the standpipe without tension or kinks, but not so excessively long that it creates unnecessary loops or becomes obstructed. Always verify the new hose's diameter matches your washing machine's outlet port for a secure connection.

What are the essential safety precautions I need to take before starting this project?

The most critical safety step is to unplug the washing machine from its power source to prevent electric shock. You must also turn off the water supply to the washing machine to avoid accidental flooding. Keep absorbent towels like WYPALL L40 Towels and a bucket, such as the Unger 6 Gal. Heavy-Duty Plastic Bucket, on hand for any residual water.

Is replacing a washing machine drain hose a difficult DIY project, and how long should it typically take?

This project is rated as 'beginner' difficulty, making it accessible for most DIYers. With the necessary tools like pliers and a screwdriver, it typically takes about 1-2 hours to complete from start to finish. This includes preparation, accessing connections, replacing the hose, and final leak testing.

What are common mistakes people make when installing a new drain hose, and how can I avoid them?

A common mistake is not securely fastening the hose to both the washing machine and the standpipe, which can lead to leaks or disconnections. Ensure all clamps are tightened properly and use cable ties, like the Micro Connectors Cable Zip Ties, for extra security. Also, avoid kinking the hose, as this restricts drainage and can cause backflow.

Transcript
Hide

That's in there all over the floor. All right, so on my hose clamp I've got one of these screwdrivers that you can take the ends out and mine actually has two different sized ends So there's the normal quarter inch size, which is what most of these tips are But on the other side it has a bigger one. I don't know what size that actually is 5'16s or 3'8s But that bigger size actually works on the hose clamp or else it's a flat head for my particular clamp in general So I'm just going to loosen that Just loosen that up and that'll be ready to come right off All right, there we go

Auto-generated transcript. May contain errors.