Disconnect Old Hoses — Disconnect Hose from Standpipe
Part of project
How to Replace a Washing Machine Drain Hose · Step 3 of 7
In this video
Place the bucket underneath the hose connections to catch any water that will drain out. Starting with the connections on the back of the washing machine, use the pliers to loosen the fittings if they are too tight to turn by hand, then unscrew them completely. Repeat this process for the connections at the water supply valves on the wall. Carefully drain any remaining water from the old hoses into the bucket.
Goal: Remove the old hoses
- Have a towel ready to catch any unexpected drips.
Used in this video
- Adjustable Pliers (Tool Type: Pliers, Power Source: Manual, Material: Metal) · optional — Loosening tight hose connections.
- Bucket (Tool Type: Hand Tools, Power Source: Manual, Material: Plastic) — Catching residual water from the hoses.
1.1M subscribers
FAQs
What type of drain hose should I buy, and does the length matter?
You'll need a corrugated or smooth appliance drain hose, such as the Everbilt 8 ft. Corrugated Washing Machine Discharge Hose. Ensure the new hose is long enough to reach the standpipe without tension or kinks, but not so excessively long that it creates unnecessary loops or becomes obstructed. Always verify the new hose's diameter matches your washing machine's outlet port for a secure connection.
What are the essential safety precautions I need to take before starting this project?
The most critical safety step is to unplug the washing machine from its power source to prevent electric shock. You must also turn off the water supply to the washing machine to avoid accidental flooding. Keep absorbent towels like WYPALL L40 Towels and a bucket, such as the Unger 6 Gal. Heavy-Duty Plastic Bucket, on hand for any residual water.
Is replacing a washing machine drain hose a difficult DIY project, and how long should it typically take?
This project is rated as 'beginner' difficulty, making it accessible for most DIYers. With the necessary tools like pliers and a screwdriver, it typically takes about 1-2 hours to complete from start to finish. This includes preparation, accessing connections, replacing the hose, and final leak testing.
What are common mistakes people make when installing a new drain hose, and how can I avoid them?
A common mistake is not securely fastening the hose to both the washing machine and the standpipe, which can lead to leaks or disconnections. Ensure all clamps are tightened properly and use cable ties, like the Micro Connectors Cable Zip Ties, for extra security. Also, avoid kinking the hose, as this restricts drainage and can cause backflow.
TranscriptHide
Auto-generated transcript. May contain errors.
Disconnect Old Hoses — Disconnect Hose from Standpipe
Part of project
How to Replace a Washing Machine Drain Hose · Step 3 of 7
In this video
Place the bucket underneath the hose connections to catch any water that will drain out. Starting with the connections on the back of the washing machine, use the pliers to loosen the fittings if they are too tight to turn by hand, then unscrew them completely. Repeat this process for the connections at the water supply valves on the wall. Carefully drain any remaining water from the old hoses into the bucket.
Goal: Remove the old hoses
- Have a towel ready to catch any unexpected drips.
Used in this video
- Adjustable Pliers (Tool Type: Pliers, Power Source: Manual, Material: Metal) · optional — Loosening tight hose connections.
- Bucket (Tool Type: Hand Tools, Power Source: Manual, Material: Plastic) — Catching residual water from the hoses.
Frequently Asked Questions
What type of drain hose should I buy, and does the length matter?
You'll need a corrugated or smooth appliance drain hose, such as the Everbilt 8 ft. Corrugated Washing Machine Discharge Hose. Ensure the new hose is long enough to reach the standpipe without tension or kinks, but not so excessively long that it creates unnecessary loops or becomes obstructed. Always verify the new hose's diameter matches your washing machine's outlet port for a secure connection.
What are the essential safety precautions I need to take before starting this project?
The most critical safety step is to unplug the washing machine from its power source to prevent electric shock. You must also turn off the water supply to the washing machine to avoid accidental flooding. Keep absorbent towels like WYPALL L40 Towels and a bucket, such as the Unger 6 Gal. Heavy-Duty Plastic Bucket, on hand for any residual water.
Is replacing a washing machine drain hose a difficult DIY project, and how long should it typically take?
This project is rated as 'beginner' difficulty, making it accessible for most DIYers. With the necessary tools like pliers and a screwdriver, it typically takes about 1-2 hours to complete from start to finish. This includes preparation, accessing connections, replacing the hose, and final leak testing.
What are common mistakes people make when installing a new drain hose, and how can I avoid them?
A common mistake is not securely fastening the hose to both the washing machine and the standpipe, which can lead to leaks or disconnections. Ensure all clamps are tightened properly and use cable ties, like the Micro Connectors Cable Zip Ties, for extra security. Also, avoid kinking the hose, as this restricts drainage and can cause backflow.
Video Transcript
(252 characters)Hide
Video Transcript
(252 characters)Transcript may be auto-generated and contain errors.